Fiber Optic Cabling Installation

Fiber-optic cabling is, without a doubt, the most popular form of optical cabling employed to link IT departments within a single large campus or in smaller campus environments. The high bandwidth and low pricing characteristic of this type of cable to make it a preferred choice for connecting network interfaces within an organization. It is also considered to be a cost-efficient solution because fiber-optic cabling can be installed in large quantities, unlike copper wiring which has to be run on a smaller scale. Additionally, fiber optic cabling is more reliable due to its optical transmission which means that broken fibers can easily be replaced without disrupting networks and servers.

Fiber Optics: A Common Cable For IT

Most IT departments require fiber optic cabling installation, which can be handled by companies that specialize in the service. If you want your own firm to handle the installation though, there are some things that you need to consider first. This is especially true if you are not particularly knowledgeable with this kind of installation. If you want to be sure that the setup is successful, read on for tips on how to achieve a successful fiber installation.

Before undertaking a fiber-optic cabling installation, it is important to first gather relevant information regarding your specific setup. You can do this by consulting your networking guide or doing some research online. Take note of potential obstacles as well as possible solutions to existing issues. The internet is also a good source for obtaining tips and other details that may help in the process. Lastly, you should ask for the assistance of a professional who can demonstrate his ability in installing fiber optics. Ask him for a free estimate so you have a clear idea of what additional expenses will be involved.

How To Install Fiber Optic Cables

After you have gathered all the needed information and materials, it is time to start the fiber-optic cabling installation. Start off by uninstalling any components that you may have brought with you when you purchased the computer and other gadgets used in the installation process. Next, unscrewing back the fiber board from the baseboard is the next step to take. This step can be quite tricky because you will need to access the junction box.

Once the baseboard and fiber optics cable is removed, locate the right fiber optic cabling installation caddy that matches the type of cables that you are using. Make sure that you have the right caddy for the cables that you have. It is also important to check the appropriate distance between each caddy as they may be installed at different distances. Install the left and right caddies in order for them to properly face each other. You may want to secure them using cable ties.

Mount the Junction Box

At this point in the fiber-optic cabling installation, it is good to secure the junction box to the wall. Make sure that it is firmly attached to the wall. It is also a good idea to mark the walls where you will be installing the fiber cables so that you will know which areas to install them. Marking the walls will also help you determine how many cables you will need to run.

Once you have marked the areas, it is time to start putting the fiber-optic cabling in place. You should start by running the cable from one junction box to the other. Then, connect the remaining cables in their respective networks. Finally, check your network cabling to see how it is installed.

Conclusion

The entire fiber optic cabling installation process usually takes a few hours. However, if you already have the required tools and skills, you can do the installation in just a couple of hours. Remember, patience is one important factor in fiber-optic cabling installation.

Avatar

Leave a Reply

Your email address will not be published. Required fields are marked *